Introduction:
This high performance unit harnesses the power of advanced techmology provide with ground balance function to measure ground mineralization and adjust itself for optimum operation, addiction the metal type mode identify the detected subject in ferrous or non-ferrous metal, Enhance the detection depth&accuracy effectively, AR924 is easy to operate, in order to take full advantage & functions of metal detection, please carefully read this instruction thoughtfully.

Application Scope:
EAST-AR924 can be used in military, in addition, it also applies to the fields as following:
Security checks and public security departments rapid searching;
Detecting raw materials, fuel and metal debris in food;
Detecting metal objects in mail and baggage;
Detecting underground pipes, cables;
Archeology, prospecting;
Gold, silver treasures and mineral metal which are underground;

Function and Characteristics:
Metal scan & Metal type mode switchable
Metal &mineral detection
Ferrous&Bib-ferrous metal discrimination
Auto calibration when turn on
Manual Eliminate Mineralization
Speaker indication
Headphone jack option
Low battery indication
LED back light option
Lead wire disconnection alarm

Package weight: 2880g

The Securitex-Hand Held Metal Detector Scanner (SHMDS-1/ESH-10) from Securitex is a very user friendly portable metal detector capable to detect all concealed metallic objects including guns, small knives to metallic parts like machine parts, screws, blade, box cutters and even tiny jewelry or electronic components carried by passengers into aircraft, metal machining factories or even sensitive installation. This system is very suitable for use at airports, seaports, banks, public buildings, prisons, stadiums, hospitals, schools. Oil and Gas facilities, Military installation, ammunition and bombs storage facilities etc. The SHMDS-1/ESH-10 detector is very durable, refined and is extremely light weight (220g) very suitable for user’s convenience. The detector provides a large scanning surface to permit quick and thorough scanning and it has vibration function for avoiding any noise or disturbance.

Environmental
The metal detector operates in a temperature range of (-15degree Celsius to +45degree Celsius)
If the minimum distance is maintained over 1 M ;

The metal detector does not affect the operation of cardiac pacemakers, mobile phones and any magnetic recording materials (tapes, cards, diskettes, etc.).

The metal detector is immune to electromagnetic interference of the frequency bands of LF, MF, HF, VHF, UHF, etc.

The metal detector does not cause any interference or be interfered by walk through metal detector, and X-ray baggage inspection system, walkie-talkie radio set and any other electronic equipment operating system in close proximity.

FEATURES
▪ Detects all types of metal object. Ferrous and non-ferrous
▪ Choice of sound alarm or silent vibration alarm
▪ Easy to use, 3 position switch for power, sound and vibration
▪ Sensitivity setting at optimum level-no tuning required
▪ Low battery indicator
▪ Quick-change battery compartment
▪ Charger Jack

SPECIFICATION & DIMENSION
▪ Indicators
Solid Yellow LED: AL - Target Detected
Flashing Green LED: PW - Power On
Flashing Red LED: BT - Low Battery Indicator

Operating Temperature: -15degress to +45 Degrees Centigrade
Sound Mode: Buzzer with Red LED
Operating Frequency: 30 KHz
Vibration Mode: Vibrator with Red LED
Reset Time: 0.5 Second, Automatic
Battery Type: Single 9 Volt Alkaline or Ni-Cd
Weight: 220g
Battery Life (NiCd): 30 to 40 Hours (Ni-Cd)
Width : 3.03” (77mm)
Battery Life (Alkaline): 28 Hours (Alkaline)
Thickness : 1.02” (26mm)
Length : 14.76” (375mm)

Package dimension: 38.5 x 8 x 4cm
Package weight: 260g

GP 3003B1

Function features:
*Simple and convenient operation
*It can easily detect pin-sized metal articles (3.5cm to the probe).
*It with a large detecting area can complete the detection by moving from top to bottom, greatly improving the working efficiency.
*It has an independent battery low voltage system and the yellow light will be on.
*It has double indication modes, namely sound & light and vibration to accurately and rapidly judge the metal position.
*With shielded damp-proof sensitivity adjusting hole, it seldom fails and is economic and durable.

Product parameters:
External dimensions: Length 415 mm*65 mm*40 mm
Packaging dimensions: 44.5 cm*26.5 cm*52 cm
Unit gross weight: 0.5 KG/PCS
Product weight: 25/box, 13.3 kg/box
Working power supply: 6F22ND 9 V battery (alkaline battery,
rechargeable battery)

Package dimension: 42.5 x 10 x 5cm
Package weight: 540g

Product Description
The HP140 Enhanced Hand Held Metal Detector is a high sensitivity device designed to detect magnetic and non-magnetic metal masses.
The unit can be used to detect weapons, detonators and other small pieces of metal concealed in baggage or correspondence.
The bidirectional detection probe allows both sides to detect metals evenly. The sensitivity of the surface is enhanced by the shape making operation of the device reliable and easy to operate.

Power supply
HP140V: 9V dry battery or 9V NiMH with contact charger
HP140VR: 9V NiMH with BC140F inductive charger

Simultaneous optical and acoustic alarm.
Built-in buzzer
Optical alarm and earphone silence mode
Sensitivity adjustable by stepless knob
Power on (green light)
Alarm (red light)
Low Batt (amber light)

Operating Temperature -15C to 65C (relative humidity: 0 to 95% )
Manufactured in grey, shock-resistant Polycarbonate and ABS blend
Dimensions 340 x 80 x 55 mm
Weight (With battery) 0.400 kg
Conforms to the international standards currently applicable for electrical safety, E. M. C. And to the applicable CE regulations

High Sensitivity
Rechargeble / earphone jack
Adjustable sensitivity by stepless knob
Detection of both Magnetic and Non-Magnetic Metals
Optical, Acoustical and Earphone silence mode
Long Battery Life
Very High Reliability
Easy to Use
Self-Calibrating
Fast Battery Charger